Electricians and electronics
Anti-acid and anti-magnetic stainless steel
Spatulas with rigid stainless steel blade, available in straight (32, 50) and bent (32P) models. Equipped with an ergonomic, non-slip bi-material handle and a steel rear tang.
The 765 EN cable ties, compliant with LVD 2014/35/EU, are made of polyamide 6.6 with excellent resistance to aromatic solvents, oils, greases and petroleum products, good resistance to basic elements, but limited to acids and do not resist phenol and chlorinated solvents; they have self-extinguishing UL 94 - V2, humidity absorption of 2.7% - 2.8% at 23°C and 50% RH, and operate in an installation temperature of -10°C ÷ +60°C and use of -10°C ÷ +85°C, packaged in packs of 100 pieces.
The 765 EB cable ties, compliant with LVD 2014/35/EU, are made of polyamide 6.6, with excellent resistance to aromatic solvents, oils, greases and petroleum products, good resistance to basic elements, and limited to acids, not resisting phenol and chlorinated solvents; they are self-extinguishing UL 94 - V2, with humidity absorption of 2.7% - 2.8% at 23°C and 50% RH, and operate between -10°C and +60°C for installation and -10°C and +85°C for use, and are packaged in packs of 100 pieces.
The 765 C round cable supports, compliant with LVD 2014/35/EU, are made of polyamide 6.6 with adhesive, offer excellent resistance to aromatic solvents, oils, greases and petroleum products, good resistance to basic elements and limited to acids, not resisting phenol and chlorinated solvents; they are self-extinguishing UL 94 - V2, absorb humidity between 2.7% and 2.8%, and operate at temperatures between -40°C and +85°C, and are packaged in packs of 100 pieces.
The 765 cable tie pliers, with a length of 195 mm, are designed for nylon cable ties up to 9 mm wide and include a cutting blade for the excess part, with a body made of deep-drawn sheet steel.
The 754 A interchangeable die crimping tool features easily replaceable dies, a right-angled handle for improved visibility, and oversized levers to reduce strain and allow for one- or two-handed grip. It comes with two dies: 754 MA for 0.5-2.5 mm² pre-insulated terminals (AWG 22-14, blue and red) and 754 MB for 0.1-6 mm² pre-insulated terminals (AWG 26-10, green and yellow). Dimensions: 230 mm x 0.1÷6 - 0.5÷2.5 mm²
The pliers for pre-insulated terminals model 751 have a rack for a progressive and calibrated compression of the terminal, with automatic reopening of the jaws after the compression is complete. It is equipped with PVC handles, jaws in micro-cast steel, and body in sheet steel. Dimensions: 215 mm x 0.5÷1 - 1.5÷2.5 - 4÷6 mm².
The crimping pliers for open non-insulated terminals model 749, compliant with DIN 46230-46234 standards, are equipped with micro-cast steel jaws and a body in drawn sheet steel. Dimensions: 227 mm x 0.1÷0.35 - 0.5÷1.0 - 1.5÷2.5 - 4÷6 - 10÷16 mm².
The 747 model pre-insulated cable lug pliers, equipped with screw cutters, wire cutters and wire strippers, have PVC handles and a body in cut sheet steel. Dimensions: 235 mm x 0.5÷1 - 1.5÷2.5 - 4÷6 mm².