Pliers
Anti-acid and anti-magnetic stainless steel
Needle nose pliers are ideal for delicate work, hobbies, access to tight spaces, electronics and clamping small parts. This pliers features an integrated wire cutter that is especially useful for working in tight spaces.
Needle nose pliers are ideal for delicate work, hobbies, access to tight spaces, electronics and clamping small parts. This pliers features an integrated wire cutter that is especially useful for working in tight spaces.
The curved jaw allows for better adaptation to curved work shapes. The built-in wire cutter is ideal for a variety of applications and material shapes.
Curved Jaw Locking Pliers with Wire Cutter - Quick Release. Curved jaw allows for better adaptation to curved work shapes. Built-in wire cutter is ideal for a variety of applications and material shapes.
Curved jaw pliers are best suited for round shaped materials. The integrated cutter is ideal for a wide range of applications and material shapes.
Self-adjusting lower jaw provides three times more gripping power than traditional locking pliers, without slipping or tearing on the head of nuts or bolts. Unique curved jaws are ideal for gripping multiple surfaces such as round pipes, square or hex bolts, and more.
The 765 EN cable ties, compliant with LVD 2014/35/EU, are made of polyamide 6.6 with excellent resistance to aromatic solvents, oils, greases and petroleum products, good resistance to basic elements, but limited to acids and do not resist phenol and chlorinated solvents; they have self-extinguishing UL 94 - V2, humidity absorption of 2.7% - 2.8% at 23°C and 50% RH, and operate in an installation temperature of -10°C ÷ +60°C and use of -10°C ÷ +85°C, packaged in packs of 100 pieces.
The 765 EB cable ties, compliant with LVD 2014/35/EU, are made of polyamide 6.6, with excellent resistance to aromatic solvents, oils, greases and petroleum products, good resistance to basic elements, and limited to acids, not resisting phenol and chlorinated solvents; they are self-extinguishing UL 94 - V2, with humidity absorption of 2.7% - 2.8% at 23°C and 50% RH, and operate between -10°C and +60°C for installation and -10°C and +85°C for use, and are packaged in packs of 100 pieces.
The 765 C round cable supports, compliant with LVD 2014/35/EU, are made of polyamide 6.6 with adhesive, offer excellent resistance to aromatic solvents, oils, greases and petroleum products, good resistance to basic elements and limited to acids, not resisting phenol and chlorinated solvents; they are self-extinguishing UL 94 - V2, absorb humidity between 2.7% and 2.8%, and operate at temperatures between -40°C and +85°C, and are packaged in packs of 100 pieces.
The 765 B bidirectional bases, compliant with LVD 2014/35/EU, are made of adhesive-free ABS, compatible with cable ties up to 4.8 mm wide, offer good resistance to basic elements and greases, but limited to acids and are not resistant to solvents, thinners and petroleum products; they are self-extinguishing UL 94 - HB, have a humidity absorption of 0.1%, operate at temperatures between -10°C and +60°C, and are packaged in packs of 100 pieces, with dimensions of 27x6x4.8x6.5 mm.
The 765 A bidirectional bases, compliant with LVD 2014/35/EU, are made of ABS with adhesive and suitable for cable ties up to 4.8 mm wide, offer good resistance to basic elements and greases, but limited to acids and do not resist solvents, thinners and petroleum products; they are self-extinguishing UL 94 - HB, have a humidity absorption of 0.1% and operate at temperatures between -10°C and +60°C, packaged in packs of 100 pieces.
The 765 cable tie pliers, with a length of 195 mm, are designed for nylon cable ties up to 9 mm wide and include a cutting blade for the excess part, with a body made of deep-drawn sheet steel.
The 754 MD matrix replacement is suitable for non-insulated stamped contacts from 0.5 to 6 mm² (AWG 22-10).
The 754 MD matrix replacement is suitable for non-insulated stamped contacts from 0.25 to 10 mm² (AWG 24-8).
The 754 MB replacement die is suitable for pre-insulated cable lugs from 0.1 to 6 mm² (AWG 26-10) and is available in the colours green and yellow.
The 754 MA replacement die is suitable for pre-insulated cable lugs from 0.5 to 2.5 mm² (AWG 22-14) and is available in the colours blue and red.
The 754 A interchangeable die crimping tool features easily replaceable dies, a right-angled handle for improved visibility, and oversized levers to reduce strain and allow for one- or two-handed grip. It comes with two dies: 754 MA for 0.5-2.5 mm² pre-insulated terminals (AWG 22-14, blue and red) and 754 MB for 0.1-6 mm² pre-insulated terminals (AWG 26-10, green and yellow). Dimensions: 230 mm x 0.1÷6 - 0.5÷2.5 mm²
30%
The 753 A pin terminal pliers feature a rack-and-pinion design to reduce compression effort, ergonomic PVC handles for one-handed crimping, a 5-impression stainless steel die, and a sheet steel body. Dimensions: 228 mm x 0.5÷1-1.5-2.5-4-6 mm².
The pliers for pre-insulated terminals model 751 have a rack for a progressive and calibrated compression of the terminal, with automatic reopening of the jaws after the compression is complete. It is equipped with PVC handles, jaws in micro-cast steel, and body in sheet steel. Dimensions: 215 mm x 0.5÷1 - 1.5÷2.5 - 4÷6 mm².