The 922 BP1 0.3 HP (220 W) angle grinder has a 90° tilted head and can be used to remove parting lines, burrs, small risers in castings, smooth welded areas, deburr, finish, cut off, grind and cut. It has an adjustable speed, a double bearing system for greater durability, and a non-slip body that is resistant to cold and vibration. It is supplied with a 6 mm collet and rear air exhaust. Measurements: 165 x 27 x 75 mm.

The 922 BL1 0.3 HP (220 W) extended straight grinder has a 126 mm extended spindle, ideal for working in hard-to-reach areas and removing cracks, crevices and welds in corners. It features a double bearing system for increased durability, a non-slip body and handle, adjustable speed, a click-lock safety lever, and rear exhaust. Supplied with 6 mm collet. Dimensions: 255 x 39 x 70 mm.

The 922 B2 0.5 HP (368 W) straight grinder offers high power for drilling, breaking welds, smoothing edges, and other work. Equipped with a double bearing system, non-slip body and handle, adjustable speed and a snap-on safety lever, it is supplied with a 6 mm collet and has a rear air exhaust. Dimensions: 177 x 48 x 77 mm.

The 922 B1 0.3 HP (220 W) straight grinder is ideal for drilling, breaking welds, and other work. With a double bearing system, non-slip body, adjustable speed, and a snap-on safety lever, it is supplied with a 6 mm collet and has a rear air exhaust. Dimensions: 160 x 39 x 70 mm.

The 921 B1 0.4 HP (300 W) straight grinder is versatile for drilling, deburring, polishing and other work. It has a safety lever, 6 mm collet, and front air exhaust. Dimensions: 142 x 40 x 62 mm.

The 921 A angle grinder offers adjustable speed and power, front exhaust, removable side handle and adjustable guard, with a disc diameter of 100 or 125 mm, power of 0.75 kW, and a no-load speed of 12,000 rpm.